English
Spanish
Flexible Denture Resin is a flexible resin for 3D printing interim removable partial dentures. Controlled flexibility allows clasp areas to move around supporting teeth, while elastic recovery helps them return toward their original form.
Flexible Denture Resin works well for partial denture designs that need controlled flex around clasp areas during insertion and removal.
For conventional denture bases where rigidity and dimensional stability matter more, standard Denture Base Resin is the better choice.
Clasp areas need enough flexibility to pass around supporting teeth without losing the intended fit of the printed denture.
| Viscosity @25°C | 419.4 mPa·s |
| Curing Wavelength | 385–405 nm |
| Density | 1.115 g/cm³ |
| Available Colors | Pink/ Dark Gingiva/ Dark Red |
| Shore D Hardness | 77 |
| Flexural Strength | 46.5-49.1 MPa |
| Flexural Modulus | 1045-1091 MPa |
Still have questions? Contact us directly. We’re here to help you find the perfect solution.
Flexible Denture Resin is available in Pink, Dark Gingiva, and Dark Red.
Flexible Denture Resin provides controlled flex and elastic recovery around clasp areas. Standard Denture Base Resin is more suitable when greater rigidity and dimensional stability are required.
This formulation is intended for interim removable dental prostheses. Permanent or long-term denture applications should use a material specifically validated for that indication.
Flexible Denture Resin is used to 3D print interim removable partial dentures, especially designs that require flexible clasp adaptation during insertion and removal.
Gingiva Resin is a flexible 3D printing material for producing removable soft tissue sections on dental and implant models. Its soft texture and flexibility allow gingiva masks to be removed and repositioned during model assembly, restoration checks, and implant case evaluation.
Water-Washable Model Resin is a photopolymer resin for 3D printing dental models with simpler post-processing. Printed parts can be cleaned with water, while stable accuracy and a smooth surface help support daily orthodontic, diagnostic, and prosthetic model production.
Castable Wax Resin is a photopolymer resin for 3D printing dental patterns used in investment and casting workflows. It supports detailed margins and framework geometries while keeping printed patterns stable during removal, support cleanup, and investment preparation.
Hard Splint Resin is a transparent, biocompatible material for 3D printing rigid occlusal splints and stabilization appliances. High hardness and flexural strength help resist bending and deformation, keeping the splint rigid and dimensionally stable during use.
Soft Splint Resin is a transparent, biocompatible material for 3D printing night guards and occlusal splints. Its lower hardness and high elongation give the cured appliance a softer, more resilient feel than rigid splint materials, while impact and abrasion resistance support everyday use.
Crown & Bridge Resin is a 40% ceramic-filled material for 3D printing permanent crowns and bridges. High flexural strength, low polymerization shrinkage, and natural translucency help produce durable restorations with stable dimensions and a smooth, polishable surface.
