English
Spanish
Gingiva Resin is a flexible 3D printing material for producing removable soft tissue sections on dental and implant models. Its soft texture and flexibility allow gingiva masks to be removed and repositioned during model assembly, restoration checks, and implant case evaluation.
Printed gingiva masks need enough flexibility to fit around implant components while remaining easy to remove and reposition. With a hardness of 36 Shore A, the cured material provides a soft, flexible feel for repeated model handling and restoration checks.
Gingiva Resin is suitable for:
| Viscosity @25°C | 84.91 mPa·s |
| Curing Wavelength | 385–405 nm |
| Density | 1.031 g/cm³ |
| Available Colors | Natural Gum Pink |
| Shore A Hardness | 36A |
| Tensile Strength | 8-11 Mpa |
Still have questions? Contact us directly. We’re here to help you find the perfect solution.
Yes. With a hardness of 36 Shore A, the cured resin remains soft and flexible for gingiva simulation and repeated model handling.
Yes. It is well suited for implant models where removable soft tissue is needed around emergence profiles, implant interfaces, and restorations.
Yes. The cured material stays flexible, so the gingiva section can be removed for inspection and placed back on the model for further fit checks.
Gingiva Resin is used to print flexible gingiva masks and removable soft tissue sections for dental and implant models.
Flexible Denture Resin is a flexible resin for 3D printing interim removable partial dentures. Controlled flexibility allows clasp areas to move around supporting teeth, while elastic recovery helps them return toward their original form.
Water-Washable Model Resin is a photopolymer resin for 3D printing dental models with simpler post-processing. Printed parts can be cleaned with water, while stable accuracy and a smooth surface help support daily orthodontic, diagnostic, and prosthetic model production.
Castable Wax Resin is a photopolymer resin for 3D printing dental patterns used in investment and casting workflows. It supports detailed margins and framework geometries while keeping printed patterns stable during removal, support cleanup, and investment preparation.
Hard Splint Resin is a transparent, biocompatible material for 3D printing rigid occlusal splints and stabilization appliances. High hardness and flexural strength help resist bending and deformation, keeping the splint rigid and dimensionally stable during use.
Soft Splint Resin is a transparent, biocompatible material for 3D printing night guards and occlusal splints. Its lower hardness and high elongation give the cured appliance a softer, more resilient feel than rigid splint materials, while impact and abrasion resistance support everyday use.
Crown & Bridge Resin is a 40% ceramic-filled material for 3D printing permanent crowns and bridges. High flexural strength, low polymerization shrinkage, and natural translucency help produce durable restorations with stable dimensions and a smooth, polishable surface.
