English
Spanish
Castable Wax Resin is a photopolymer resin for 3D printing dental patterns used in investment and casting workflows. It supports detailed margins and framework geometries while keeping printed patterns stable during removal, support cleanup, and investment preparation.
Accurate casting starts with a well-printed pattern. Fine margins, clasps, and framework contours need to remain clearly defined while the pattern is removed, cleaned, and prepared for investment.
Castable Wax Resin can be used to produce 3D printed patterns for:
Dental frameworks
Post and core patterns
Inner crown patterns
Other detailed dental casting applications
The resin is supplied in green, making margins, contours, and support areas easier to inspect before investment.
| Viscosity @25°C | 100.8 mPa·s |
| Curing Wavelength | 385–405 nm |
| Density | 1.064 g/cm³ |
| Available Colors | Green |
| Shore D Hardness | 33-34 |
| Tensile Strength | 28-31 Mpa |
| Flexural Strength | 33-34 Mpa |
| Flexural Modulus | 753-780 Mpa |
Still have questions? Contact us directly. We’re here to help you find the perfect solution.
Castable Wax Resin is compatible with LCD 3D printers operating at 385–405 nm. Share your printer model with us if you need help confirming compatibility or printing settings.
Yes. Burnout conditions should match the resin, investment material, and casting workflow. Follow the recommended heating and holding procedure for the materials being used.
Yes. It supports thin margins, clasps, framework contours, and other small features commonly required in dental casting patterns.
Castable Wax Resin is used to 3D print dental casting patterns, including frameworks, post and core patterns, copings, and other detailed restorations prepared for investment and casting.
Flexible Denture Resin is a flexible resin for 3D printing interim removable partial dentures. Controlled flexibility allows clasp areas to move around supporting teeth, while elastic recovery helps them return toward their original form.
Gingiva Resin is a flexible 3D printing material for producing removable soft tissue sections on dental and implant models. Its soft texture and flexibility allow gingiva masks to be removed and repositioned during model assembly, restoration checks, and implant case evaluation.
Water-Washable Model Resin is a photopolymer resin for 3D printing dental models with simpler post-processing. Printed parts can be cleaned with water, while stable accuracy and a smooth surface help support daily orthodontic, diagnostic, and prosthetic model production.
Hard Splint Resin is a transparent, biocompatible material for 3D printing rigid occlusal splints and stabilization appliances. High hardness and flexural strength help resist bending and deformation, keeping the splint rigid and dimensionally stable during use.
Soft Splint Resin is a transparent, biocompatible material for 3D printing night guards and occlusal splints. Its lower hardness and high elongation give the cured appliance a softer, more resilient feel than rigid splint materials, while impact and abrasion resistance support everyday use.
Crown & Bridge Resin is a 40% ceramic-filled material for 3D printing permanent crowns and bridges. High flexural strength, low polymerization shrinkage, and natural translucency help produce durable restorations with stable dimensions and a smooth, polishable surface.
