English
Spanish
Water-Washable Model Resin is a photopolymer resin for 3D printing dental models with simpler post-processing. Printed parts can be cleaned with water, while stable accuracy and a smooth surface help support daily orthodontic, diagnostic, and prosthetic model production.
Water-Washable Model Resin is a photopolymer resin for 3D printing dental models with simpler post-processing. Printed parts can be cleaned with water, while stable accuracy and a smooth surface help support daily orthodontic, diagnostic, and prosthetic model production.
Water-Washable Model Resin can be used for a range of 3D printed dental models, including:
Orthodontic models
Diagnostic models
Prosthetic working models
Other dental study and reference models
| Viscosity @25°C | 259.3 mPa·s |
| Curing Wavelength | 385–405 nm |
| Density | 1.036 g/cm³ |
| Available Colors | Light Yellow |
| Shore D Hardness | 74 |
| Tensile Strength | 20-21 Mpa |
| Flexural Strength | 68.5-76.5 Mpa |
| Flexural Modulus | 1648-1842 Mpa |
| Cleaning Method | Water / 95% Ethanol |
Still have questions? Contact us directly. We’re here to help you find the perfect solution.
Yes. It can be used for orthodontic model production, where stable dimensions and clearly reproduced dental anatomy are important for model inspection and routine lab work.
The main difference is the cleaning process. Water-washable resin allows printed models to be cleaned with water, which can simplify routine post-processing compared with resins that rely mainly on alcohol-based cleaning.
Yes. This resin is formulated for water-washable post-processing. The technical data also lists 95% ethanol as an available cleaning method.
It is used to 3D print dental models for orthodontic, diagnostic, prosthetic, and other routine laboratory applications.
Flexible Denture Resin is a flexible resin for 3D printing interim removable partial dentures. Controlled flexibility allows clasp areas to move around supporting teeth, while elastic recovery helps them return toward their original form.
Gingiva Resin is a flexible 3D printing material for producing removable soft tissue sections on dental and implant models. Its soft texture and flexibility allow gingiva masks to be removed and repositioned during model assembly, restoration checks, and implant case evaluation.
Castable Wax Resin is a photopolymer resin for 3D printing dental patterns used in investment and casting workflows. It supports detailed margins and framework geometries while keeping printed patterns stable during removal, support cleanup, and investment preparation.
Hard Splint Resin is a transparent, biocompatible material for 3D printing rigid occlusal splints and stabilization appliances. High hardness and flexural strength help resist bending and deformation, keeping the splint rigid and dimensionally stable during use.
Soft Splint Resin is a transparent, biocompatible material for 3D printing night guards and occlusal splints. Its lower hardness and high elongation give the cured appliance a softer, more resilient feel than rigid splint materials, while impact and abrasion resistance support everyday use.
Crown & Bridge Resin is a 40% ceramic-filled material for 3D printing permanent crowns and bridges. High flexural strength, low polymerization shrinkage, and natural translucency help produce durable restorations with stable dimensions and a smooth, polishable surface.
